PLSD 48 A1
■
10
│
GB
│
IE
│
NI
Setting the working temperature
♦
Press the + / — buttons
/
to set the working temperature
in steps of 10°C .
The current target temperature is shown on the LC display .
NOTE
►
Press the + / — buttons
/
to change the working tempera-
ture continuously in steps of 10°C .
Release the + / — buttons
/
when the desired tempera-
ture is reached .
■
If the + / — buttons
/
are not pressed again, the heating-up
temperature is shown on the LC display after 3 seconds .
Set the programmed temperature
In addition to the temperature setting using the + / — buttons
/
,
there are 3 preset temperatures: 200°C / 300°C / 400°C .
♦
Press preset temperature or or to adjust the desired
preset temperature .
The preset temperature is shown with an arrow on the display .
IB_289612_PLSD48A1_LB6-.indb 10
10.07.17 11:40