GB
6
IE
NI
Technical Data
3-in-1 multi-purpose sander ..... PMFS 200 B2
Rated input voltage (U)
......
230 V~, 50 Hz
Power input (P)
.............................200 W
Idling speed (n
0
)
...........7000-12000 min
-1
Oscillation rate (n)
......14000-24000 min
-1
Weigh
t (without sander disc and
dust collection box)
.....................
1.38 kg
Protection class
.................................
II
Protection category
...........................IP20
Sound pressure level
(L
pA
)
......................79
dB(A); K
pA
= 3 dB
Sound power level
(
L
WA
)
....................
90 dB(A); K
WA
= 3 dB
Vibration
(a
h
)
................ 13.4 m/s
2
;
K
h
= 1.5 m/s
2
Technical and optical changes may be
undertaken in the course of further develop-
ment without notice. All dimensions, refer-
ences and information in this instruction
manual are therefore not guaranteed. Legal
claims made on the basis of the instruction
manual can therefore not be considered as
valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
Notes on Safety
This section details the basic safety instruc
-
tions for working with the appliance.
Symbols
Symbols in the manual:
Warning symbols with infor-
mation on damage and injury
prevention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
