PMK 550 A1
■
12
│
GB
│
IE
NIBBLER PMK 550 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please fa-
miliarise yourself with all the operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is suitable for cutting steel sheet
and aluminium sheet. This appliance is exclusively
intended for private use in dry indoor spaces. Any
other usage or modification of the appliance is
deemed to be improper and carries a significant
risk of accidents. The manufacturer accepts no
responsibility for damage attributable to misuse.
Features
ON/OFF switch
Hex screw
Measuring groove 1.6 mm
Measuring groove 1.2 mm
Die holder
Die
Hex key
Hex screw
Grooved pin
Hex key
Tool holder
Brush holder caps
Package contents
1 nibbler
2 grooved pins (1 pre-assembled)
2 hex keys
1 set of operating instructions
Technical specifications
Rated voltage
230 V ∼ 50 Hz
(AC)
Rated power
consumption
550 W
Idling stroke rate
2200 strokes/min
Cutting capacity/material thickness
max. in
aluminium
2,5 mm (200 N/mm²)
steel
1,6 mm (400 N/mm²),
1,2 mm (600 N/mm²),
0,8 mm (800 N/mm²)
Min. cutting radius
inside = 45 mm
outside = 50 mm
Cutting track width
5 mm
Protection class
II / (double insulation)
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically
Sound pressure level
L
pA
= 93 dB (A)
Uncertainty
K
pA
= 3 dB
Sound power level
L
WA
= 104 dB (A)
Uncertainty
K
WA
= 3 dB
Wear ear muffs!
