PNKP 105 B1
GB
│
IE
│
7
■
Preparing the surfaces to be glued
♦
Pull the trigger
3
to regulate the flow of glue in accordance with
your requirements .
1 . Apply the glue in spots . For flexible materials, such as textiles,
apply the glue in zigzag lines .
2 . Press the two workpieces to be bonded together immediately
after applying the glue and hold for about 30 seconds . The
glued bond is ready after about 5 minutes .
3 . During breaks in work, put the glue gun down on the stand
4
.
Switching the appliance off
♦
Unplug the appliance from the mains socket .
140
The nozzle
5
reaches a temperature of over 140°C .
Maintenance and cleaning
WARNING!
Always remove the power plug from the
power socket before cleaning the appliance!
■
The low-temperature glue gun is maintenance-free .
■
Keep the appliance clean and dry at all times .
■
Never permit liquids to enter inside the appliance . Use a cloth to
clean the housing . Never use petrol, solvents or cleansers which
can damage plastic .
Summary of Contents for PNKP 105 B1
Page 3: ......
