05
Congratulations on the purchase of your new
product. You have chosen a high quality product
with this purchase. This operating manual is an
integral part of this 2-speed mains-operated drill
(hereafter referred to only as the „drill“). It contains
important instructions on safety, use and disposal
of the product. Please familiarise yourself with all
operating and safety instructions before using the
product. Only use the product as described and
for the stated purpose. If the product is passed on
to a third party, please provide all documents to
the third party together with the product.
The following symbols and key words are used
in this operating manual, on the drill or on the
packaging.
1. Introduction
Symbols used
Parts list
Speed selector switch
Carbon brushes cover
Forward / reverse lever
Locking button
Handle
ON / OFF switch / Speed regulator
Torque adjustment ring
Chuck
Chuck unlocking mechanism
Torque setting mark
Drive spindle with a bit holder
Screwing bit, 50 mm
3
1
4
2
5
6
7
8
9
10
11
12
Read the operating manual.
Products marked with this symbol
comply with all applicable
regulations of the European
economic area.
Protection category 2
The „GS“ symbol stands for verified
safety. Products that are marked with
this symbol meet the requirements of the
German product safety law (ProdSG).
Indicates a hazard that, if not avoided, could
result in death or serious injury.
WARNING!
Signals a hazard that can cause injuries when
ignored.
CAUTION!
Warns against possible damages.
NOTE!
The model name on the drill is a combination of
letters and numbers:
PNS 300 B2
=
2-Speed Power Drill
Scope of delivery
• 2-Speed Power Drill
• Screwing bit, 50 mm
Model number
PNS 300 B2
Mains connection
230 V ~ / 50Hz
Rated power
300 W
No-load speed
1. Speed 0 – 400 min
-1
2. Speed 0 – 1600 min
-1
Max drilling
capacity:
Steel max. 10 mm
Wood max. 25 mm
Protection class
II
2. Technical data
