9
IE
GB
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the addi-
tional use of a paper filter bag.
1. Fit the fluted filter (23).
2. Fold the side flaps on the paper filter
bag (24) down on the perforation.
3. Completely unfold the paper filter bag
(24) and pull it over the internal suc-
tion nozzle (8) in the stainless steel
container (9). The connector on the
suction nozzle must be completely en-
closed by the sealing ring on the filter
bag opening.
A
fine dirt filter bag
made of micro
filter fleece
is also optionally avail-
able, which can be used in place
of the included paper filter bag (see
“Spare parts/Accessories”).
Vacuuming with the dry filter
(fabric filter bag, optionally
available):
The anti-tear fabric filter bag, which is
optionally available (see “Spare parts/Ac-
cessories”), is suitable for vacuuming both
large and small dirt particles.
1. Place the foam filter (
21) on the filter
basket (
27) (see “Wet Vacuuming”).
2. Pull the fabric filter bag over the filter
basket.
Wet vacuuming
1. For wet vacuuming or to vacuum wa-
ter, fit the foam filter (21) to the filter
basket (27) on the motor head (3).
To avoid tearing the foam filter (21):
- Use only a dry filter;
- Before inserting, twist the edge of
the filter slightly and then roll it back.
2. Suctioning up (draining) water: place
the suction hose (
19) on the handle
(
20) into the water tank and suc-
tion up the water.
3. Empty the stainless steel container
immediately after suction cleaning be-
cause it is not designed to store liquids
(see „Cleaning/Maintenance“).
Never reach into the water to
be suctioned up. Danger of
electric shock.
When the container (
9) is full, the
suction opening is shut off by a float,
and suction is then cut off. Switch the
appliance off, remove the plug from
the socket and empty the container
(see “Cleaning/Maintenance”).
If foam or liquid exits, switch off the
machine immediately.
Blow Function
Operation without the use of a filter
is recommended.
• Connect the suction hose (19) to the
connecting blower (15) on the motor
head (3).
