I E
G B
N I
1 1
-
cohol or tablets, do not work with the
device. Always have a break on time.
• Switch the device off and remove the
mains plug
- to loosen a blocked insertion tool,
- if the connection line is damaged or
entangled,
- in case of unusual sounds.
• Only operate the equipment in an up-
right, standing position and ensure you
have secure footing.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Lung damage, if suitable respiratory
protection is not worn.
b) Hearing damage, if suitable ear protec-
tion is not worn.
c) Damages to health due to
- touching the area of the grinding tool
which was not covered;
- the ejection of pieces from workpiece
or damaged grinding discs.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
electric tool generates an electro-
circumstances, may impair the func-
tionality of active or passive medical
.
-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
• Only use grinding tools recommended
by the manufacturer. Do not use any
saw blades. Ensure that the dimensions
match those of the device.
• Only use grinding discs where the
printed rotational speed is at least as
name plate of the device.
• Carry out a visual inspection of the
grinding disc before use. Do not use
any damaged or deformed grinding
discs. Replace any damaged or worn
grinding discs.
• Never operate the device without spark
protection or protective hoods.
Periodically readjust the spark protection
in order to offset the wear and tear of
the grinding disc (distance max. 2 mm).
• Replace the grinding disc if the spark
protection and the workpiece support
can no longer be readjusted to a dis-
tance of max. 2 mm at the latest.
grinding do not present a danger, e.g.
-
stances.
• Always wear safety glasses, safety
gloves, respiratory protection and ear
protection when grinding, brushing and
separating.
grinding disc and spark protection or in
close proximity to the protective hoods.
.
be covered due to functional reasons.
slipping which could cause your hands to
come into contact with the grinding disc.
.
Do not touch the machined area, allow
.
-
ing. Do not use coolants or the like.
Summary of Contents for PNTS 250 B1
