Parkside PNTS 250 B1, Translation Of The Original Instructions

I E

G B

N I

5

Introduction

Congratulations on the purchase of your 

new device. With it, you have chosen a 

high quality product.

During production, this equipment has 

been checked for quality and subjected to 

. 

equipment is therefore guaranteed.

. 

important information on safety, use 

and disposal. Before using the prod-

uct, familiarise yourself with all of 

the operating and safety instructions. 

Use the product only as described 

. 

Keep this manual safely and in the 

event that the product is passed on, 

hand over all documents to the third 

party.

Intended use

-

ening tools (e.g. knives, scissors, chisels), 

and deburring and grinding smaller metal 

workpieces.

types of applications (e.g. grinding with 

unsuitable grinding tools, grinding with a 

coolant solution, grinding hazardous mate-

rials such as asbestos).

.       

-

cial use. 

. 

    6 

are permitted to use the equipment only 

. 

not be liable for damages caused by use 

other than for the intended purpose or by 

incorrect operation. 

Content

Introduction ................................. 5

Intended  use ................................ 5

General  description ...................... 6

Scope of delivery ............................. 6

Function description.......................... 6

Summary ........................................ 6

Technical specifications

 ................. 7

Safety Instructions........................ 8

Symbols and icons ........................... 8

General safety instructions ................ 9

 ................ 10

Residual  risks ................................. 11

Assembly ................................... 12

 .... 12

 .... 12

Screw device on to workbench ........ 12

Fill water into the water tank ............ 13

Operation .................................. 13

Switching on and off ...................... 13

Grinding with the dry grinding disc .. 14

Grinding with the wet grinding disc . 14

Change grinding disc ..................... 14

Cleaning and maintenance ......... 16

Cleaning ....................................... 16

General maintenance ..................... 16

Storage ...................................... 16

Waste disposal 

and environmental protection .... 16

Replacement  parts/accessories ... 17

Trouble  Shooting ........................ 18

Guarantee ................................. 19

Repair  Service ............................ 20

Service-Center ............................ 20

Importer .................................... 20

Translation of the original

EC declaration of conformity ...... 39