18
GB
IE
Warning:
The vibration and noise emissions
may deviate from the specified val
-
ues during actual use of the power
tool, depending on the type and
manner in which the power tool is
used – and in particular which type
of workpiece is processed.
Try to keep the exposure to vibra
-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Notes on safety
Caution! When using power tools,
observe the following basic safety
measures for the prevention of electric
shocks and the risk of injury and fire.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.
Symbols and icons
Symbols on the device:
Warning!
Read the manual!
Wear eye protection
Wear breathing protection
Wear ear protection
Do not expose the unit to rain.
Electrical machines do not belong
with domestic waste
This device is part of the Park
-
side X 20 V TEAM series.
Graphical symbols on the polishing
pads:
Hand wash
Do not bleach
Not suitable for tumble drying
Do not iron
Do not clean with chemicals
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage
Precaution symbol with information
on prevention of harm / damage
Notice symbol with information on
how to handle the device properly
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool.
Omissions in the
compliance with safety directions
