Parkside PPS 200 A1, Translation Of The Original Instructions

PPS 200 A1

GB

│

IE

│

NI

│

 3

■

WARNING!

►

The vibration level varies depending on the 
use of the power tool and may be higher 
than the value specified in these instructions 
in some cases. Regular use of the power tool 
in this way may cause the user to underesti-
mate the vibration. Try to keep the vibration 
loads as low as possible. Measures to reduce 
the vibration load are, e.g. wearing gloves 
and limiting the working time. Wherein all 
states of operation must be included (e.g. 
times when the power tool is switched off and 
times where the power tool is switched on but 
running without load).

   General Power Tool 

Safety Warnings

WARNING!

►

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire and/
or serious injury.

Save all warnings and instructions for future 
reference.

The term "power tool" in the warnings refers to your 
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1.  Work area safety

a)  

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b)  

Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

c)  

Keep children and bystanders away while 
operating a power tool.

 Distractions can cause 

you to lose control.

2.  Electrical safety

a)  

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools.

 Unmodified plugs and matching outlets 

will reduce risk of electric shock.

b)  

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c)  

Do not expose power tools to rain or wet 
conditions.

 Water entering a power tool will 

increase the risk of electric shock.

d)  

Do not abuse the cord. Never use the cord 
for carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp 
edges or moving parts.

 Damaged or entangled 

cords increase the risk of electric shock.

e) 

 When operating a power tool outdoors, use 
an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces 
the risk of electric shock.

f)  

If operating a power tool in a damp location 
is unavoidable, use a residual current device 
(RCD) protected supply.

 Use of an RCD reduces 

the risk of electric shock.

3.  Personal safety

a)  

Stay alert, watch what you are doing and 
use common sense when operating a power 
tool. Do not use a power tool while you are 
tired or under the influence of drugs, alcohol 
or medication.

 A moment of inattention while 

operating power tools may result in serious 
personal injury.

b)  

Use personal protective equipment. Always 
wear eye protection.

 Protective equipment such 

as dust mask, non-skid safety shoes, hard hat, or 
hearing protection used for appropriate condi-
tions will reduce personal injuries.

c)  

Prevent unintentional starting. Ensure the 
switch is in the off-position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool.

 Carrying power tools  

with your finger on the switch or energising power 
tools that have the switch on invites accidents.