25
GB
IE
earthed (grounded) power
tools.
Unmodified plugs and
matching outlets will reduce risk
of electric shock.
b) Avoid body contact with
earthed or grounded sur-
faces, such as pipes, ra-
diators, ranges and refrig-
erators.
There is an increased
risk of electric shock if your
body is earthed or grounded.
c) Do not expose power
tools to rain or wet condi-
tions.
Water entering a power
tool will increase the risk of
electric shock.
d) Do not abuse the cord.
Never use the cord for
carrying, pulling or un-
plugging the power tool.
Keep cord away from
heat, oil, sharp edges or
moving parts.
Damaged or
entangled cords increase the
risk of electric shock.
e) When operating a power
tool outdoors, use an ex-
tension cord suitable for
outdoor use.
Use of a cord
suitable for outdoor use reduces
the risk of electric shock.
f)
If operating a power tool
in a damp location is una-
voidable, use a residual
current device (RCD) pro-
tected supply.
Use of an RCD
reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you
are doing and use common
sense when operating a
power tool. Do not use a
power tool while you are
tired or under the influence
of drugs, alcohol or medi-
cation.
A moment of inattention
white operating power tools may
result in serious personal injury.
b) Use personal protective
equipment. Always wear
eye protection.
Protective
equipment such as dust mask,
non-slip safety shoes, hard hat,
or hearing protection used for
appropriate conditions will re-
duce personal injuries.
c) Prevent unintentional
starting. Ensure the switch
is in the off-position be-
fore connecting to power
source and/or battery
pack, picking up or car-
rying the tool.
Carrying
power tools with your finger on
the switch or energising power
tools that have the switch on
invites accidents.
d) Remove any adjusting key
or wrench before turning
the power tool on.
A wrench
or a key left attached to a rotat-
ing part of the power tool may
result in personal injury.
e) Do not overreach. Keep
proper footing and bal-
ance at all times.
This ena-
bles better control of the power
tool in unexpected situations.
f) Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair,
clothing and gloves away
from moving parts.
Loose
clothes, jewellery or long hair
can be caught in moving parts.
