10 GB/IE/NI
m
WARNING!
u
The vibration and noise emissions during
actual use of the power tool can differ
from the declared values depending on
the manner in which the tool is used,
especially what kind of workpiece is
processed.
u
It is necessary to identify safety measures
to protect the operator that are based on
an estimation of exposure in the actual
conditions of use (taking account of all
parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
General safety notes
General power tool safety warnings
m
WARNING!
u
Read all safety warnings,
instructions, illustrations and
specifications provided with
this power tool.
Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
1)
Keep work area clean and well
lit.
Cluttered or dark areas invite
accidents.
2)
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Power tools create
sparks which may ignite the dust or fumes.
3)
Keep children and bystanders
away while operating a power
tool.
Distractions can cause you to lose
control.
Electrical safety
1)
Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools.
Unmodified plugs and
matching outlets will reduce risk of electric
shock.
2)
Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators.
There is an increased
risk of electric shock if your body is
earthed or grounded.
3)
Do not expose power tools to rain
or wet conditions.
Water entering a
power tool will increase the risk of electric
shock.
4)
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged or
entangled cords increase the risk of electric
shock.
5)
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces the
risk of electric shock.
6)
If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply.
Use of an RCD
reduces the risk of electric shock.
Summary of Contents for PRTA 20-Li D3
Page 3: ...1 4 6 7 8 9 5 2 3 A B C...
Page 4: ...D E 4 5 F1 5...
Page 5: ...20V max 18V...
Page 6: ...G H F5 F2 8 9 F4 7 6 0 180 F3 9 15 1 75 5 2 3 4...
