Parkside PSBSA 18-Li A1, Translation Of Original Operation Manual

7

PSBSA 18-Li A1

GB

IE

CY

Changing tools

Your cordless combi drill has a fully automatic 
spindle lock 

.

When the motor is stopped, the power train is 
locked so that the chuck   can be opened by turn-
ing 

. After you have attached the desired tool 

and tightened it by turning the chuck 

, you can 

continue working. The spindle lock is automatically 
released when the motor starts (ON/OFF switch 
pressed  ).

Selecting torque/operating mode

The torque selector allows adjustment of the torque   
or selection between the drill setting   and the 
hammer drill setting  .

♦

Select a low level for small screws or soft 
materials.

♦

Select a high level for large screws, hard materials 
or removing screws.

♦

Select the drill setting for drilling work by adjust-
ing the torque selection ring to the position  .

♦

Select the hammer drill setting for hammer drilling 
work by adjusting the torque selection ring to 
the position  .

2 speed gearbox

CAUTION!

►

Only operate the speed selection switch   
when the appliance is at a standstill. 
Otherwise the appliance can be damaged.

In fi rst gear (speed selector switch   in 
position: 1)

you can reach a speed of approx. 440 rpm and 
a high torque. This setting is suitable for all screw-
driving but also for the use of accessories.

In second gear (speed selector switch   in 
position: 2)

you can reach a speed of approx. 1650 rpm for 
carrying out drilling work.

First use

Switching on and off 

Switching on:

♦

To start the appliance, press and hold the ON/
OFF switch  .
The LED work light   illuminates when the 
ON/OFF switch   is depressed even lightly. 

♦

This allows illumination of the work area in low 
light conditions.

Switching off :

♦

Release the appliance’s ON/OFF switch   to 
switch off  the appliance.

Setting the rotational speed

Pressing the ON/OFF switch   lightly provides a 
low rotational speed. Increasing pressure increases 
the speed.

NOTE

►

The integrated motor brake ensures a quick 
stop.

Changing the direction of rotation

♦

Change the direction of rotation by pressing the 
rotational direction switch   towards the left 
or right.

Tips and tricks

Tip! This symbol indicates proper 
behaviour!

♦

Before operation, check whether the screw or 
drill bit is correctly positioned, i.e. centred in the 
drill chuck.

♦

Screw bits are labelled according to their di-
mensions and their shape. If you are uncertain, 
always check whether the bit fi ts tightly in the 
screw head without any free play.

Torque:

♦

Smaller screws/bits can be damaged if you set 
the torque or rotational speed too high.

IB_102868_PSBSA18-LiA1_LB6.indb   7

IB_102868_PSBSA18-LiA1_LB6.indb   7

09.10.14   12:04

09.10.14   12:04