12 GB/CY
Secure the adjusting screw
14a
with the ad-
justing nut
14b
.
Secure the links in the chain guide
7
by
turning the clamping lever
13
clockwise.
Use the adjusting screw
6
to set the depth
limiter so the grinding disc
18a
makes con-
tact with the gullet (see Fig. D2). Fix the
grinding depth with the adjusting nut
6
.
Sharpening:
Switch on the product (see chapter “Switch-
ing on and off“).
Sharpen the cutting tooth
27
by moving the
grinding head
2
down, applying light
pressure to the handle
4
.
Never brake the grinding disc
18a
to a
stop. To prevent this, reduce the pressure
being applied in due time.
Switch the product off to move the saw
chain along. Loosen the clamping lever
13
and use the set stop
15
and the clamping
lever to secure the next link to be sharp-
ened in the chain guide
7
.
Note:
First sharpen the teeth on one side
of the chain. Then adjust the sharpening an-
gle and sharpen the teeth on the other side.
Checking the depth limiter distance
(see Fig. D3):
The cutting parts of the saw chain are the cut-
ting links, consisting of a cutting tooth
27
and a
depth limiter nose
28
. The height distance be-
tween these two determines the depth limiter
distance A.
Check the depth limiter distance A accord-
ing to saw chain manufacturer specifica-
tions after every third sharpening.
Rasp the height of the depth limiter nose
28
with a flat file and slightly round after re-
moving the depth limiter nose. The original
shape must be maintained.
Maintenance and cleaning
Always unplug from the mains
before any adjustment, service
or repairs.
Have any work not described in these in-
structions for use performed by a specialist
workshop. Always use original parts. Allow
the product to cool down before perform-
ing any maintenance or cleaning. Risk of
burns.
Check the product for any damage such as
loose, worn or damaged parts, correctly
fastened screws or other parts, before every
use. Particularly inspect the grinding disc
18a
.
Replace any damaged parts.
Cleaning
Do not use cleaners or solvents. Chemicals
may damage plastic parts on this product.
Never clean the product under running
water.
Clean the product after every use.
Clean the vents
21
and the surface of the
product with a soft brush or a cloth.
Clean the chain guide
7
with a brush.
If very dirty, loosen the chain tensioner
locking nut
10
and remove the chain
tensioner with rotary table
12
for better
access. We recommend removing the side
panels for cleaning.
Replacing the grinding
disc (see Fig. E)
Information about replacing the
grinding disc:
Never operate the product without the
visual cover
20
.
Verify the speed specified on the grinding
disc
18a
is equal to or greater than the
rated idle speed of the product. Verify the
dimensions of the grinding disc fit the product.
Summary of Contents for PSG 85 A1
