7
G B
I E
Intended purpose
The table circular saw is used for cutting all
types of wood lengthwise and crosswise
(only with the transverse stop), depending
on the machine size. All types of round
timbers must not be cut with it. The ma-
chine may be used only for its prescribed
purpose.
Any other use beyond that is considered to
be not in accordance with the designated
purpose. The user/operator is liable for all
types of resulting damage or injury and not
the manufacturer.
The only saw blades which may be used
are those which are suitable for the machi-
ne (HM or CV saw blades).
The use of any type of HSS saw blades
and cutting discs is prohibited. Use in ac-
cordance with the designated purpose is
also deemed to include observance of the
safety instructions, as well as the assembly
and operating instructions in the opera-
ting manual.Individuals who operate and
maintain the machine must be familiar with
it and must have been instructed in possi-
ble hazards. Moreover, the latest accident
prevention regulations must be strictly ob-
served. Other general rules in the fields of
occupational health and safety technology
must be complied with.
Caution!
When using equipment, certain safety
precautions must be complied with in order
to avoid injuries and damage. You should
therefore read these operating instructions
/ safety instructions carefully. Keep these
in a safe place so that the information is
available to you at all times. Should you
give the device to anyone else, please give
them these operating instructions / safety
instructions as well. We assume no liability
for accidents or damage caused by failure
to observe these instructions or the safety
instructions. Changes to the machine will
cause the manufacturer‘s liability with
respect to any resulting damage to be com-
pletely excluded. Even when the device is
used in accordance with the designated
purpose, it is nevertheless not possible to
completely eliminate certain residual risk
factors. Due to the design and structure of
the machine, the following risks may occur:
• Touching the saw blade in the area of
the saw which is not covered;
• Reaching into the running saw blade
(cuts)
• Kickback of workpieces and workpiece
parts.
• Saw blade breaks.
• Ejection of faulty hard metal parts of
the saw blade.
• Hearing damage if the necessary hea-
ring protection is not used.
• Emissions of wood dust which are
harmful to the health when used in clo-
sed rooms.
Please note that the use of our devices in
accordance with the designated purpose
does not include commercial, handicraft or
industrial applications. We assume no war-
ranty if the device is used in commercial,
handicraft or industrial businesses or for
equivalent purposes..
General description
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- - Saw table with pre-assembled, carbide-
tipped saw blade with 24 teeth
- Carbide-tipped saw blade with 48 teeth
- Blade guard
