5
N I
I E
G B
Scope of delivery
Unpack the device and check for comple-
teness. Dispose of the packaging material
properly.
- Disc sanding device
- Sanding disc
- Screw clamp
- Angle stop
- 2x granulation 80
- 2x granulation 150
- 2x granulation 240
- Angle adapter and adapter for exter-
nal dust extraction
- Hexagon socket wrench
- Operating instructions
Description of functions
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Sanding disc
2 Speed regulator
3 On/off switch
4 Receptor for screw clamp
5 Mains plug
6 Angle scale
7 Screw for angle locking
8 Washer
10 Sanding table holder
11 Sanding table
12 Slot for angle stop
13 Angle stop
13a Angle stop rail
13b Angle stop screw
14 Angle adapter
for external dust extraction
15 Adapter
for external dust extraction
16 Screw clamp
17 Hexagon socket wrench
18 Sanding paper
1
Technical Data
Disc sander ................ PTSG 140 B2
Rated input voltage .......... 230 V~, 50 Hz
Power input ............. 140 W (S2 15 min)*
Idling speed (n
0
) .............max. 3600 min
-1
Safety class .....................................II
Protection category ..........................IPX0
Weight ........................................2,4 kg
Sanding disc diameter ................ 125 mm
Sound pressure level
(L
pA
) ................... 62,7 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .......... 75,7 dB(A); K
WA
= 3 dB
* After continuous operation of 15 minutes the
drill stops until the device temperature de-
viates by less than 2 K (2°C) from the room
temperature.
Levels of noise were determined according
to the norms and regulations in the decla-
ration of conformity.
Notes on safety
CAUTION! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of
Please read all these instructions
before using this electric tool and
please keep the safety instructions.
Summary of Contents for PTSG 140 B2
Page 31: ......
