Parkside PWBS 180 A1, Translation Of The Original Instructions

PWBS 180 A1

GB

│

IE

│

NI

│

CY

│

 5

■

4 .  Power tool use and care

a)  

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at 
the rate for which it was designed .

b)  

Do not use the power tool if the switch does 
not turn it on and off.

 Any power tool that can-

not be controlled with the switch is dangerous 
and must be repaired .

c)  

Disconnect the plug from the power source 
and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally .

d)  

Store idle power tools out of the reach of 
children and do not allow persons unfamiliar 
with the power tool or these instructions to 
operate the power tool.

 Power tools are  

dangerous in the hands of untrained users .

e)  

Maintain power tools. Check for misalignment 
or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. If damaged, have the 
power tool repaired before use.

 Many acci-

dents are caused by poorly maintained power 
tools .

f)  

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to 
control .

g)  

Use the power tool, accessories and tool bits, 
etc., in accordance with these instructions, 
taking into account the working conditions 
and the work to be performed.

Use of the power tool for operations different 
from those intended could result in a hazardous 
situation .

5 .   Service

a)  

Have your power tool serviced by a qualified 
repair person using only identical replace-
ment parts.

 This will ensure that the safety of 

the power tool is maintained .

b)  

Always arrange for the replacement of the 
plug or the power cord to be carried out by 
the manufacturer of the appliance or by his 
approved customer services.

 This will ensure 

that the safety of the power tool is maintained .

Safety instructions for all 

applications

General safety instructions for grinding and 
sandpaper sanding:

(a)  

This power tool is intended for use as a grinder 
and sandpaper sander. Please follow all safety 
instructions, instructions, diagrams and data 
that you receive with the appliance.

Failure to observe the following instructions can 
lead to an electrical shock, fire and/or serious 
injuries .

b)  

This power tool is not suitable for working with 
wire brushes, polishing and cut-off grinding

 .  

Using the power tool for applications for which it 
is not designed can lead to hazards and injuries .

c)  

Do not use any accessories that have not 
been specifically provided or recommended 
by the manufacturer for this power tool.

 Just 

because you can attach the accessories to your 
power tool does not guarantee they are safe to 
use .

d)  

The maximum speed of the accessory tool 
used must be at least as high as the maximum 
speed specified for the power tool.

 Accesso-

ries which rotate faster than the maximum per-
missible rate can break and throw pieces into 
the air .