PWBS 180 B2
GB
│
IE
│
25
■
Before use
WARNING! RISK OF INJURY!
►
Always remove the plug from the power
socket before working on the appliance.
CAUTION!
►
Wear protective gloves when changing
tools.
There is a risk of injury if the accessory
tools are touched.
■
Different application tools are available,
depending on the material being machined and
the desired degree of surface removal required.
NOTE
►
Do not put the appliance down without the
accessory tool fitted (sanding disc, carbide
sanding head, etc.). The brush ring may
bend and be damaged.
Change sanding sheets
The surface of the sanding disc consists of
a velcro fabric so that you can fasten sanding
sheets quickly and easily.
♦
Before attaching a new sanding sheet ,
remove dirt and dust from grinding disc , e.g.
with a brush.
♦
Position the sanding sheet flush against the
edge of the sanding disc ; lay the sanding
sheet then onto the sanding disc and
press it firmly into place. Make sure that the
suction holes on the sanding sheet and the
grinding disc match up.
♦
To remove the sanding sheet , lift the edge
and pull it off the sanding disc .
Fitting/changing accessory tools
(Fig. A)
WARNING!
►
Press the spindle locking button
only
when the grinding spindle is at a standstill.
Otherwise the appliance may be damaged.
NOTE
■
The carbide grinding head is suitable for
removing formwork transitions on exposed
concrete, residual concrete on formwork
boards or adhesive residues on tiles.
■
Only use carbide sanding
heads with an even sanding
surface.
♦
Clean the sanding spindle and all parts to
be mounted.
♦
Press the spindle locking button
to clamp
and release the accessory tool.
♦
To fit the accessory tool, place the mounting
flange onto the sanding spindle .
♦
Place the desired accessory tool onto the
sanding spindle .
♦
Screw the clamping nut and tighten it with
the two-hole assembly spanner .
NOTE
►
Make sure that the collar of the clamping
nut is facing outwards.
12
≤ 3,2 mm
Summary of Contents for PWBS 180 B2
Page 3: ......
Page 4: ...A B 19a 18a...
Page 36: ...PWBS 180 B2 32 GB IE...
Page 102: ...PWBS 180 B2 98 CZ...
