PWBS 180 B2
■
26
│
GB
│
IE
Installing the dust extraction system
Dust from materials such as lead-based paints,
some types of wood, minerals and metal can be
harmful to health. Touching or inhaling the dusts
may cause allergic reactions and/or respiratory
illnesses of the user or people in the vicinity.
Certain dusts such as oak or beech dust are consid-
ered carcinogenic, especially in combination with
wood treatment additives (chromate, wood preserv-
atives). Materials containing asbestos may only be
worked on by specialists.
■
Always use dust extraction.
■
Operate the power tool either with the dust
bag or connect an approved dust and chip
extraction device.
■
Ensure that your workplace is adequately
ventilated.
■
We recommend you wear a respirator with
a class P2 filter.
■
Avoid kinking the suction hose .
Observe the applicable regulations in your country
regarding the materials to be worked.
♦
Plug the inlet side of the suction hose onto
the extraction nozzle .
♦
Pull the mouthpiece
19a
off the suction hose .
Open the zip on the dust bag
18a
. Now plug
the outlet end of the suction hose into the
corresponding opening on the dust bag .
Reconnect the mouthpiece
19a
to the suction
hose from the inside. Close the zip on the
dust bag
18a
.
♦
Proceed in the reverse order to dismantle the
suction hose .
Mounting the adapter for external
extraction
♦
Push the dust extraction adapter onto the
extraction nozzle .
♦
Connect an approved dust extraction system.
NOTE
►
When sawing wood or other materials that
can create dusts that are hazardous to
health, always connect a suitable, certified
vacuum extractor appliance.
Adjusting the additional handle
The angle of the additional handle can be
adjusted to achieve a more favourable working
position for the guide hand in certain applications
(e.g. when grinding close to an edge).
♦
Loosen the two wing screws and tilt the
additional handle to the desired working
position.
♦
Retighten the wing screws .
Working procedures
WARNING! RISK OF INJURY!
►
Always remove the plug from the power
socket before working on the appliance.
►
Wait until the appliance has come to a
standstill before putting it down.
The removal rate and the surface quality are deter-
mined by the selection of the sanding tool, the
preselected speed level and the contact pressure.
Only sanding tools that are in perfect condition
provide a good sanding performance and protect
the appliance.
Summary of Contents for PWBS 180 B2
Page 3: ......
Page 4: ...A B 19a 18a...
Page 36: ...PWBS 180 B2 32 GB IE...
Page 102: ...PWBS 180 B2 98 CZ...