Parkside PWS 1010 Operation And Safety Notes Download

Page: 9 / 105

General safety advice for electrical power tools

Do not use an electrical power tool if
its switch is defective.

An electrical power

tool that can no longer be switched on and oﬀ
is dangerous and must be repaired.

Pull the mains plug out of the socket
before you make any adjustments to
the device, change accessories or when
the device is put away.

This precaution is

intended to prevent you from unintentionally
starting the device.

When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone use
the device if he or she is not familiar
with it or has not read the instructions
and advice.

Electrical power tools are dan-

gerous when they are used by inexperienced
people.

Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use the
device.

Many accidents have their origins in

poorly maintained electrical power tools.

Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.

Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and advice,
and the stipulations drawn up for this
particular type of device. In doing
this, take into account the working
conditions and the task in hand.

The

use of electrical power tools for purposes other
than those intended can lead to dangerous
situations.

Safety advice for all uses

General safety advice for grinding,
sanding (with sandpaper), wire brushing,
polishing and disc-cutting:

This electrical power tool is intended
for use as a grinding, sanding, wire-
brushing, and disc-cutting machine.

Observe all the safety advice, instructions, in-
formation in ﬁgures and all other information
you received with this device. If you do not
observe the following advice it could lead to
electric shock, ﬁre and / or serious injury.

b) Normative statement / advice for this tool is not

applicable.

Do not use any accessory not specifi-
cally intended by the manufacturer
for this electrical power tool.

Although

an accessory may ﬁt on your electrical power
tool, this does not on its own guarantee that it
can be safely used.

The maximum permitted speed of an
attachment must be at least as high as
the maximum speed indicated for the
electrical power tool.

An accessory rotating

faster than its permitted speed could disintegrate
or ﬂy oﬀ.

The external diameter and the thickness
of the attachment must be compatible
with the dimensions of your electrical
power tool.

Attachments that are not dimen-

sionally compatible cannot be adequately
guarded or controlled.

Grinding discs, flanges, grinding

wheels or other accessories must fit
exactly on to the spindle of your elec-
trical power tool.

Attachments that do not

exactly ﬁt on the spindle turn unevenly, vibrate
severely and could lead to loss of control.

Do not use damaged attachments.

Before every use check attachments
such as grinding discs for loose frag-
ments and cracks, grinding wheels for
cracks, deterioration or excessive
wear and wire brushes for loose or
broken wires. If the electrical power
tool or attachment is dropped, inspect