4
GB
IE
NI
Content
Introduction ................................. 4
Intended purpose ......................... 4
General description ...................... 5
Extent of the delivery ........................5
Overview ........................................5
Functional description .......................5
Technical data .............................. 5
Safety instructions ........................ 6
Symbols and icons ...........................6
Symbols on the appliance .................6
Symbols on the recharger ..................6
General safety instructions for power
tools ...............................................6
Charging the battery .................. 10
Recharging the battery .................. 11
Checking the battery charge level ... 11
Starting up ................................. 11
Operation .................................. 11
1. Direction switch ......................... 11
2. Bit selection from the
bit changeable drum .................. 11
3. Use extension bit holder .............. 12
4. Switching on/off ........................ 12
5. Bit change in the
bit changeable drum .................. 12
Cleaning and maintenance ......... 12
Cleaning ..................................... 12
Maintenance ................................ 13
Storage ...................................... 13
Disposal and protection of the
environment .............................. 13
Guarantee ................................. 13
Repair Service ............................ 14
Service-Center ............................ 15
Importer .................................... 15
Spare parts/Accessories ............. 15
Translation of the original EC
declaration of conformity ............ 56
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute part of
this product. They contain important infor
-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended purpose
The device is intended for drilling screws in
and out in wood, metal or plastic.
Any other use that is not explicitly
approved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The manufacturer cannot be held liable
for damage when the device is not used
in conformity with its intended purpose or
due to incorrect operation.
This equipment
is not suitable for commercial use.
Commercial use will invalidate the
guarantee.
Summary of Contents for RAPIDFIRE
