40 GB/MT
Avoid contact with the moving sand-
ing sheet.
Use the appliance only with a sanding
sheet in place.
Never use the appliance for purposes
other than those intended and only
with original components / accessories.
Introduce the appliance to the work
piece with it switched on.
On task com-
pletion, lift the appliance from the work piece
and then switch it off.
Permit the switched off appliance to
come to a complete standstill before
putting it down.
The appliance must always be kept
clean, dry and free of oil or grease.
Keep your workplace clean.
Material
mixtures are particularly dangerous. Light met-
al dust can burn or explode.
Do not use the electric tool with a
damaged lead.
Do not touch the damaged
lead and remove the mains plug if the lead be-
comes damaged while you are work-ing with
the device. Damaged leads increase the risk of
an electric shock.
Original accessories / tools
Use only the accessories detailed in the operat-
ing instructions. The use of inserted tools or ac-
cessories other than those recommended in the
operating instructions could lead to you suffer-
ing an injury.
Before use
Selecting the Grinding Disc
Metal Removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
lease note that corresponding grinding discs
with different grain sizes should be used for
processing different materials.
Changing sanding sheets
WARNING!
RISK OF INJURY!
Before
carrying out work on the appliance, always re-
move the plug from the power socket.
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
Lift the grinding disc
5
at the side and pull it off
from the backing pad
4
in order to remove it.
Note:
Before securing a new sanding sheet
5
,
remove all dust and dirt from the sander plate
4
.
Ensure that the openings in the sanding sheet
5
concur with the boreholes of the sanding plate
4
.
Dust / Swarf Removal by Suction
Please note the “Safety instructions” section.
Removal by Suction with Dust Collector:
Push the dust collector
3
completely onto the
device.
In order to empty the dust collector
3
pull it
off the device.
Note:
Empty the dust collector
3
in good
time and regularly in order to ensure the opti-
mum removal of dust by suction.
External Exhaust Suction (see Illustration A):
Connection:
Push the adapter for external exhaust suction
7
on to the exhaust nozzle
6
and turn it clock-
wise to fix it in place. If necessary, use the re-
ducing piece
8
by pushing it into the adapter
for external exhaust suction
7
.
Push the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
adapter for external exhaust suction
7
, using
the reducing piece if necessary
8
.
Removal:
Pull the hose of the suction device off the
adapter for external exhaust suc-tion
7
.
Turn the adapter for external exhaust suction
7
in an anticlockwise direction and pull it off with
the reducing piece
8
if necessary.
General safety advice for electrical power tools / Before use
