Parkside Xq 270, Operation And Safety Notes

11 

GB

 Commissioning

  Switching on and off

Note! 

Always switch the rotary sander on before 

applying it to the material to be worked, then make 
contact with it.
When operating the device you can select be-
tween intermittent or continuous operation mode

To switch on intermittent operation mode:

Press the ON / OFF switch 

1

.

To switch off intermittent operation mode:

Release the ON / OFF switch 

1

.

Switching on continuous operation:

 Press the ON / OFF switch 

1

, keep it pressed 

down and press the locking button 

2

.

Switching off after sustained operation:

 Press the ON / OFF switch 

1

 and then release it.

 Working instructions

 Wait until the electric tool has stopped moving 
before you put it down.

 Grinding Surfaces

 Turn the electric tool on, place the entire grinding 
surface on the substrate that is to be worked 
on and move it with moderate pressure across 
the workpiece (see Illustration B, C, D).

Note:

 The rate of metal removal and the 

grinding pattern are essentially determined by 
the grinding disc that has been selected and 
the grinding pressure. Only grind-ing discs that 
are in perfect condition will provide good 
grinding performance.

 Please ensure that the grinding pressure is 
even. An excessive increase in the grinding 
pressure leads not only to a higher rate of met-
al removal, but also greater wear and tear on 
the grinding disc.

 You should not use a grinding disc that has 
been used for working metal for other materials.

  Maintenance and Cleaning

WARNING!

 RISK OF INJURY! 

Before 

carrying out work on the appliance, always remove 
the plug from the power socket.

The rotary sander is maintenance free.

 Clean the appliance regularly, preferably direct-
ly on completion of the task. 

 Use a dry cloth to clean the device. Under no 
circumstances should you use petrol, solvent or 
cleaners which attack plastic.

Keep the ventilation openings clear at all times.

   Remove dust clinging to the sander 

with a brush.

Service centre

WARNING!

Have your device re-

paired only by qualified specialist 
personnel using original manufacturer 
parts only.

 This will ensure that your device 

remains safe to use.

WARNING!

If the plug or mains 

lead needs to be replaced, always have 
the replacement carried out by the 
manufacturer or its service centre.

 This 

will ensure that your device remains safe to use.

 Warranty

This appliance is guaranteed for 3 years 
from the date of purchase. It has been care-
fully produced and meti-culously checked 
before delivery. Please keep your receipt 
as proof of purchase. Contact your service 
centre by telephone in case of questions 
pertaining to the warranty. Your goods 
can be transmitted free of cost only in this 
manner. This warranty applies only to the 
initial purchaser and is non-transferable.

Commissioning / Working  … / Maintenance  …/ Service  centre / Warranty