Introduction / Safety Instructions
Rotary Sander XQ 600
Sanding of large areas.
For wood, plastics and metal
Introduction
Before using the appliance for the first
time make yourself familiar with all func-
tions of the appliance and inform yourself
about the correct handling of electrical tools.
To do this, read the following operating instructions.
Retain these instructions for future reference.
Pass these documents on to whoever might acquire
the appliance at a future date.
Intended utilisation
The appliance is suitable for the dry sanding and
buffing of wood, metal and paint. Any other uses,
and modifications to the appliance, are deemed to
be improper usage and may result in serious physical
injury. The manufacturer accepts no responsibility
for damage(s) resulting from improper usage. This
appliance is not intended for commercial applications.
Features and Fittings
Q
Handswitch
DUO-
START
W
On / Off switch
E
Locking button
R
Dust collection box
T
Adjusting wheel - rotation speed selector
Y
Release button - dust collection box
U
Suction ring
I
Sanding plate
O
Sanding pad
P
Front switch
DUO-
START
{
Adaptor for external dust suction (Fig. D)
Items supplied
1 Rotary Sander XQ 600
2 Sanding sheets (1x Grit 80, 1x Grit 120)
1 Dust collection box
1 Suction adaptor
1 Operating manual
1 Booklet "Warranty and Service"
Technical data
Rated voltage:
230 V ~ 0 Hz
Rated power:
600 W
Nominal oscillations:
n
0
.000 - 16.000 min
-1
Nominal revolutions:
n
0
2.00 - 8.000 min
-1
Excentricity:
mm
Sanding plate:
ø 10 mm
Protection class:
II /
Noise and Vibration Informationen:
Determined noise level with A evaluation.
Sound pressure level:
84 dB (A)
Acoustic power level:
8 dB (A)
Evaluated acceleration, typical.
Hand-arm vibration:
, m / s
2
Safety instructions
J
Important!
When using electric-powered tools
the following fundamental safety instructions
need to be observed for your protection against
electric shock, personal injury and the danger
of fire. Read and take note of these operating
instructions and the safety advice contained
therein before using the appliance. Non-observ-
ance of the following instructions could give you
an electric shock, cause a fire and / or incur seri-
ous personal injury.
Working area safety
J
Keep your working area clean and tidy. Ensure
good illumination of the working area. Untidy
and poorly lit working areas can lead to accidents.
6 GB/IE
Summary of Contents for XQ 600 - MANUAL 2
