16
For Example:
If cooking time takes 45 minutes and you want it to finish at 14:00:
1.
Press button, set the cooking time to 45 minutes with the
+
and
–
buttons.
2.
Press button, set finish time to 14:00 with + and – buttons.
3.
Set cooking temperature and cooking mode by turning the thermostat knob and mode
selector knob.
After the above setting, the current time is displayed and
“AUTO”
will flash, indicating that the
automatic cooking feature is set. When the clock displays 13:15, the oven will
start cooking automatically. While cooking,
“AUTO”
and
will flash. When the clock displays
14:00, the oven automatically stops cooking. The alarm will ring and
“AUTO” will flash. Press the button and the ringing will stop.
Semi Automatic Setting
1.
Press button, set cooking finish time with + and – buttons. (Up to 23 hours and 59
minutes).
2.
Set cooking temperature and cooking mode by turning the thermostat knob and mode
selector knob.
The oven starts immediately, and
“AUTO”
will flash. At the finish time reached, the oven
automatically stops cooking. The alarm will ring and
“AUTO”
will flash. Press the alarm bell to stop
the ringing.
When the button is pressed during semi-automatic cooking, the set cooking time
is displayed. If the button is pressed and the time set back to 0, the semi-
automatic setting will be cancelled. When the button is pressed again, the oven will revert
back to manual mode.
Timer
The digital timer can be set up to 23 hours and 59 minutes maximum.
To set the timer, press the function button repeatedly until the square bar above the
symbol flashes, and adjust the time by pressing the + or – buttons. The timer
countdown will begin to work. When it reaches the set time, the square bar above the
symbol begins to flash and the alarm will ring. To stop the alarm ringing, press
any button.
NOTE
: when making time and mode selections they must be entered within 5 seconds.
In case of power failure, all settings including the time display will be lost. When the power is
restored, three ‘0’ and “
AUTO”
will be displayed.