24
Replacing the Oven Lamps
WARNING
: Ensure that the appliance is turned off before replacing the oven lamp/s to avoid the
possibility of electric shock.
Remove the glass cover of the lamp holder as shown below.
Remove the lamp and replace with a lamp resistant to high temperatures (300
o
C) with the
following characteristics.
Voltage: 220 – 240V
Wattage: 25W
Type: E14
Disposal
Parmco has a commitment to being environmentally responsible. To avoid potential negative
impacts on the environment, please ensure that this appliance is disposed of correctly. This
product must not be treated as household waste. Instead, it should be handed over to an
appropriate collection point for recycling of electrical and steel components.
Disposal should always be carried out in an environmentally appropriate manner.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local City Council office.
Routine Maintenance
The gas pipes and pressure regulator (if installed) should be checked periodically to ensure they
are in good working condition. If anomalies are found, contact an authorised service agent.
To ensure good working performance and safety, the gas regulator taps must be greased
periodically by authorised personnel only!
Abnormal Operation
Any of the following are considered to be abnormal operation and may require servicing.
Yellow tipping of the burner flame
Sooting up of cooking utensils
Burners not igniting properly
Burners failing to remain alight
Burners extinguished by closing cupboard doors
Gas valves being difficult to turn
Replacement lamps are available from
Parmco Appliances.