26
Installation of this appliance and its connection to the electrical mains must only be carried out
by authorized personnel. Before any service procedure, it is important to ensure that the
appliance is DISCONNECTED from the electrical mains.
Do not modify this appliance.
After removing the appliance from the packaging, make sure it is undamaged. In the unlikely
event this occurs, contact Parmco before operating this appliance.
Make sure that this appliance is adequately ventilated.
Make sure that the appliance is supplied with the type of gas indicated on the data label and
the gas type label next to the connection point.
Use of gas cooking appliances produces heat and moisture in the room in which it is installed.
Ensure that the room is well ventilated by keeping the air intakes free of obstruction and in
good working order, and/or by installing a ventilation extraction system.
If the appliance is used intensively for a long time, the effectiveness of the ventilation will need
to be increased, for example, by opening a window or increasing the power of the ventilation
fan.
NOTES TO THE AUTHORIZED INSTALLER
This appliance shall only be installed by an authorized person. This appliance shall only be
installed in complete accordance with the Gas and Electrical Standards of New Zealand. All local
regulations, building code requirements, and all other statutory requirements must be met.
Data Label
The data label is located at the rear of the appliance. A duplicate label is supplied for you to
adhere to a suitable accessible area next to the appliance. The data label on the appliance must
NEVER be removed. This appliance is suitable for use with both Natural Gas and LPG. A label is
provided to adhere to the appliance to show which type of gas the appliance has been set to use.
Ventilation
This appliance must be installed in accordance with the relevant gas installation standards. In
general, the appliance must have adequate ventilation for complete combustion of gas, proper
extraction, fueling, and the maintenance of temperature of immediate surroundings to within safe
limits.
Before any procedure, it is important to check that the appliance is DISCONNECTED from the
electrical mains. Parmco declines all responsibilities for any damage deriving from installations
that are in breach of the regulations in force or from failure to comply with these installation
instructions.
INSTALLATION INSTRUCTIONS
