background image

 

 

During use, the appliance becomes hot. Care should be taken to avoid touching heating 
elements inside the oven. 

 

Keep the appliance thoroughly cleaned. Food residues may cause fire risks. 

 

Do not use a steam cleaner to clean this appliance. 

 

When the gas burners are lit, check the flame is always regular. 

 

WARNING: Accessible parts may become hot during use. To avoid burns, young children should 
be kept away. 

 

Do not use pans with unstable or deformed bottoms as this may cause overturning and spilling. 

 

Never line the oven with aluminium sheets, trays, tins or utensils as doing so may damage 
the enamel and elements and cause the appliance to malfunction. 

 

Take care not to spill sugar or sweet mixtures on to the ceramic glass surface when hot. Never 
place materials or substances that could melt (plastic of aluminium foil) on the ceramic glass. In 
the event this happens, promptly switch off and remove the molten material while the cooking 
zone is still warm to prevent it from being damaged. Failure to instantly clean the ceramic glass 
could lead to incrustations, which are impossible to remove once the cooktop has cooled down. 

 

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since 
they can scratch the surface, which may result in the glass shattering. 

 

After using the appliance, please ensure that all controls are in the “OFF” position.  

 

Avoid touching the oven with wet body parts. 

 

Avoid improper or dangerous use of this appliance. 

 

Do not obstruct the ventilation or heat dissipation slots. 

 

Do not allow power cables of other appliances to come into contact with hot parts of this 
appliance. 

 

This appliance is intended for indoor use only. Avoid exposing the appliance to atmospheric 
elements such as direct sunlight and rain. 

 

Do not spray aerosols in the vicinity of this appliance while it is in operation. 

 
 

 

DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE OR NEAR THIS 
APPLIANCE. 

 
 

For any enquiries please contact Parmco Appliances (09) 573 5678. 

 

 

 

Summary of Contents for AR600



































Reviews: