background image

3

4

You can choose different programme base on your different clothes materials. The device has the 
function with sensor the moisture in order to automatically adjust the drying time for optimal drying. 
This drying system is fit for cottons, synthetics sections and Anti-Bacterial, silk programme. 

You can choose the time of drying according to the actual situation  To cancel a program which is running, 
turn the program selector dial to “off”.  At the end of drying, turn the selector dial to “off” to switch the 
machine off before removing the laundry. 

.

Depending on the programme, different functions can be combined. These must be selected after 
choosing the desired programme and before depressing the Start/Pause button. e. g. choosing the 
“Heavy” programme, “Buzzer” function and “Anti-Crease” function can be combined. When these 
buttons are pressed, the corresponding pilot lights comes on. When they are pressed again, the pilot 
lights go out.

 Control panel

1.Control Panel   

2.Drainage container

3.Fluff filter

4.Door

5.Condenser cover

6.

Adjustment leg

Condenser

7.

1.  Programme Selection Knob      2.  Time               3.  Child Lock        4.  Dry Level      5.  Anti Crease
6.  Buzzer                                     7.  Delay Start      8.  Start/Pause      9.  Indicator Lights:
                                                                                                                     Drainage Container
                                                                                                                     Fluff Filter

Ensure that the electrical connections comply with the installation instructions.
Remove the polystryrene block and any material from the drum.

Before using your tumble dryer for the first time, we recommend that you place a few damp cloths inside the 
appliance and dry for 30 minutes .There may be dust inside a brand new tumble dryer.

Open the door
Place the laundry in the drum, one item at a time ,shaking them out as much as possible. 
Close the door .Please check the laundry does not get caught between the door and filter.

Turn the program selector dial to the required program. The corresponding function lights is on.

The program will be switched off if you have not pressed any button for 10 minutes.

Attention:

“         ” is for the “standard cotton programme”. The 

programme is suitable to dry normal wet cotton 

laundry and it is the most efficient programme in 

terms of energy consumption for drying wet cotton 

laundry. 

Some thick clothes ( jeans, big towel ). Because of 

the material characteristics, some place hard to dry. 

If you find that they are not completely dry at the 

end of the program. It is recommended to use the 

“Time” program to dry again.

Select the Dry level

Before you start the machine, you can choose the dry level.  The dry level is divided into three 
grades. (      Heavy      Strong      Normal )
This option is only 

 to the five programs: Standard, Cotton, Synthetic, Bulky Item, Towel.

suitable

After turning on the appliance ,the buzzer is on if you do none operation .The buzzer can be turned on or 

be turned off durning the process .

the buzzer will be turned on and the corresponding pilot light comes on.

when the buzzer is on, the signal will sound in the following case:

           Open the door during operation.

           When the water container is full.

           At the end of program after cooling phase.

When the buzzer is on, if you press the “buzzer” button once more, the buzzer will be switched off.

By pressing “Anti crease” and the “Delay start” button at the same time

Anti

-

crease

 

is

 

a

 

default

 

setting

 

at

 

the

 

end

 

of

 

each

 

programmes

Longer

 

Anti

-

crease

 

can

 

be

 

selected

 

while

 

the

 

programme

 

is

 

standby

 

or

 

pause

.

This

 

button

 

allows you to delay the starting of the program by 24 hours max. This option must be selected 

after having selected the program and before pressing Start/Pause to start the program. Every time the 

button is pressed, the time is increased by 1 hour.

7

6

5

3

2

1

4

9

8

1
2

3

4

7

5

6

4

Summary of Contents for DR8WCON
















Reviews: