Page
11
of
14
Press the Mode key (B) to select quick freeze mode and quick freeze icon (8) shows, then
press the Lock/Unlock key (D) to confirm and the refrigerator will be operating in quick
freeze mode.
Releasing Intelligent, Manual, Rapid Cooling and Quick Freeze Modes
Press the Mode Settings key (B) to cancel the corresponding modes, then press the
Lock/Unlock key (D) to confirm.
Refrigerator Compartment Temperature Settings
Press the Refrigerator Temperature key (C) once and the key flashes, then press the
Temperature key (C) again to set the temperature between the range of 2° to 8°.
Freezer Compartment Temperature Settings
Press the Freezer compartment temperature key (A) once, and the key flashes, press it again
and you can set the temperature between the range -16°C to -24°C
Power Failure Memory Function
When the electricity is off the refrigerator locks in the state it is set on, when the power is
turned back on it automatically goes to the state it was operating in.
Compressor Protection Function
The compressor running time is controlled by specialist latency circuits to ensure the
running time intervals are not less than 5minutes.
Failure Tips
When the screen displays E1-E6 this indicates that the unit is malfunctioning. The
refrigerator is still able to function with some failures, but it must be repaired as soon as
possible to prevent any further damage.
