background image

 

 

 

For Your Safety 

 
This manual includes important safety instructions. We recommend to read this manual carefully 
before installing and using the appliance. Keep this manual for future reference. If the appliance is 
moved, make sure the manual is handed over to the new user.   
 

Installation 

 

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas 
pressure) are compatible with the adjustment of the appliance. 

 

This appliance is not connected to a combustion products evacuation device. It shall be installed 
and connected in accordance with current installation regulations, with particular attention to 
the relevant ventilation requirements.  

 

Installation of the appliance and its connection to the electrical mains must only be carried out by 
a QUALIFIED PERSONNEL. Before any procedure, it is important to check that the appliance is 
DISCONNECTED from the electrical mains. 

 

Do not attempt to modify the characteristics of this product to avoid personal injuries, damages 
or void the warranty. 

 

After removing the appliance from the packaging, make sure that it is undamaged and that the 
electrical lead is in perfect condition. Otherwise, contact your dealer before putting the appliance 
into operation. 

 

The Manufacturer declines all responsibility in the case of failure to comply with accident 
prevention regulations. 

 

Make sure that air is able to circulate freely around the appliance. Poor ventilation results in a 
shortage of oxygen. 

 

Make sure that the appliance is supplied with the type of gas indicated on the data plate on the 
appliance. 

 

The adjustment conditions for this appliance are stated on the data plate. 

 

Use of a gas cooking appliance produces heat and moisture in the room in which it is installed. 
Ensure that the room is well ventilated by keeping the air intakes open and in good working order 
or by installing an extractor hood with a discharge pipe. 

 

If the appliance is used intensively for a long period of time, the effectiveness of the ventilation 
will have to be increased, for example, by opening a window or increasing the power of any 
electric extractor fan. 

 

During use 

 

This product is designed to cook foods inside domestic homes and for non-professional purposes. 
It should not be used for any other purpose. 

 

After using the appliance, make sure that all controls are in the “CLOSED” or “OFF” position. 

 

If you use an electrical socket close to this appliance, take care that the cables of the appliances 
you are using are far away from the hot parts of this appliance. 

 
 

Summary of Contents for HO-1


















Reviews: