background image

 

 

Do not leave the appliance unattended when in use. Boilover or greasy spillovers 
may cause fire.   

 

Do not use the appliance for warming or heating the room.   

 

If malfunctions occur do not attempt to repair the appliance yourself. First refer 

to the troubleshooting section of this manual. If you do not find the necessary 
information, contact a service agent or the Parmco's Service Department. 
Servicing work on this appliance must be carried out by a qualified technician only. 
Always request the use of original spare parts.

 

 

Do not use your electric hob by the means of an external timer or as an 

remote-control system.

 

 

Appliances which are no longer used or usable are not worthless waste. Through 
environmentally friendly disposal, a number of materials used in the production 
of your appliance can be recovered. 

 

Find out about the current disposal options from your local city council. 

 

Before scrapping the appliances, cut the power supply lead and make it unusable.   

 
 
Description of the heat plates 

 
 
 
   1. Heat plate 1000W 
   2. Rapid heat plate 
    (Red spot) 2000W and 
    Large heat plate 1500W 
      3. Control knobs 
   4. Power indicator light 
 
 
 
 
 
 
 
 

4

Summary of Contents for HOB6S-4E-4














Reviews: