background image

 

2

 
 
 
 
 
 

We recommend that for best performance and to extend the life of your appliance you 
read the instructions in this owner's manual thoroughly before using your new 
appliance. It will provide you with all the information you need to ensure its safe 
installation, proper use and maintenance. Retain this owner's manual for future 
reference. 
 
To maintain the efficiency, and safety of this appliance we recommend the following: 
 

BEFORE USING THIS APPLIANCE 
Read the instructions thoroughly 

 

Remove all plastic protective films on the appliance before operating the appliance.  

 

Remove the plastic film on the oven glass door (when provided). 

 

To condition the oven for its first use, it is necessary to allow oils and residues used 
to protect the appliances during manufacturing to burn off. Heat the empty oven at 
maximum temperature for 45 minutes. This allows unpleasant smells and smoke 
from protective oils used during manufacture and from new thermal insulation to 
burn off. 

 

Allow the unit to cool off and wash the oven out with soapy water and then rinse. 

 

 
FOR YOUR SAFETY

 

 

This appliance is designed for non-commercial, household use only and must not be 
altered in any way. 

 

This appliance can only be used safely when it is correctly connected to an efficient 
earthing system in compliance with New Zealand Electrical Standards requirements. 

 

Before maintenance or cleaning, always ensure that the appliance is disconnected 
from the mains. 

 

Always use oven gloves to remove and replace cookware in the oven. 

 

Packaging items such as plastic bags, polystyrene, nails, etc that this appliance is 
delivered in are potentially dangerous, and therefore appropriate measures must be 
taken to prevent children from coming into contact with them. 

 

This appliance must only be used by adults. Make sure that children do not touch 
the controls or play with the appliance. Young children should be supervised to 
ensure they do not play with the appliance. 

 

Do not allow children to sit on or play with the oven door. 

 

Do not use the drop down door as a stool to reach overhead cabinets. 

 

This appliance is not intended for use by persons (including children) with reduced 
physical, sensory, mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning the use of this appliance 
by a person responsible for their safety. 

 

During use the appliance becomes hot. Care should be taken to avoid touching 
heating elements inside the oven. 

 

Keep the appliance thoroughly cleaned. Food residues may cause fire risks. 

 

DO NOT use a steam cleaner to clean this appliance. 

IMPORTANT SAFETY INFORMATION 

Summary of Contents for OV-M1-6S-9




















Reviews: