6
1.
SETTING THE CLOCK
After the unit is connected to power, the symbols 0:00 will display on the control panel.
Press
and the hour indicator will flash.
Rotate "K2" clockwise to adjust the hour digits, the time should be within 0-23
hrs.
Press
and the minutes indicator will flash.
Rotate "K2" clockwise to adjust the minutes digits, the time should be within 0-
59 min.
Press
to finish the clock settings. " : " will flash.
Note
: The clock is 24 hours, and must be set for the oven to function!
2. SEETING FUNCTION AND TEMPERATURE
Rotate "K1" to choose the desired cooking function and the indicator will come
on.
Rotate "K2" to adjust the temperature.
Press
to confirm the start of cooking. The default temperature for that
cooking function will be displayed. The selected temperature will flash until the
temperature has been reached, then it will beep and stop flashing.
Note:
The step quantities for time adjustments of the coding switch are:
0 -- 0:30min: step 1 minute
0:30--9:00 hours: step 5 minutes
The step quantity for temperature adjustment is 5° C, and for the grill function is
30° C.
Rotate "K1" to adjust the cooking time when cooking begins, then press
to
start cooking. If
is not pressed within 3 seconds, the oven will revert to the
previous time and continue cooking.
Rotate "K2"to adjust the temperature when cooking begins. The corresponding
indicator will flash, then press
to start cooking. If
is not pressed within 3
seconds, the oven will revert to the default temperature setting.
3. ENQUIRING FUNCTION
During cooking, you can select the enquiring function; after 3 seconds the oven will
return to the current working state.
During cooking, press
to check the current time.
If the clock was set, press
to check the remaining time.
OPERATING
INSTRUCTIONS
