20
PROBLEM
REASON
ACTON
1.The appliance does not work
Break in power supply
Check the household fuse box; if there
is a blown fuse replace it with a new
one
Choose wrong function
Check if function knob. Temperature
knob is set to the correct position.
2.The programmer display is flashing
“0.00”
The appliance was disconnected from
the mains or there was a temporary
power cut.
Set the current time(see use of the
programmer)
3. The oven lighting does not work.
The bulb is loose or damaged.
Tighten up or replace the blown
bulb(see cleaning and maintenance)
OPERATION IN CASE OF EMERGENCY
In the event of an emergency
,
you should:
Switch off all working units of the oven
Call the service center
Some minor faults can be fixed by referring to the instructions given in the table below. Before calling the
customer support center or the service center check the following points that are presented in the table.
●
●
●