6772
Calorimetric Thermometer Instruction Manual
8-1
MEMORY MANAGEMENT
The 6772 Calorimetric Thermometer will hold
data for 1000 tests in its memory. These
tests may be pre weights, preliminary or final
reports for either calibration or determination
runs. Once the memory of the controller is
filled, the controller will not start a new
analysis until the user clears some of the
memory.
The FILE MANAGEMENT key on the main
menu leads to the file management sub-
menu. The RUN DATA FILE MANAGER
key leads to a listing of the files. Single files
can be deleted by highlighting the file and
pressing the DELETE key. The controller will then ask the user to confirm that this file is to
be deleted. A series of files can be deleted by selecting the first file in the series and then
the last file in the series using the EXTEND SEL key and then pressing the DELETE key.
The controller of the 6772 Calorimetric Thermometer can accept SD memory cards. These
cards can be used to:
•
Copy test file data for transfer to a computer
•
Copy user settings for back up
•
Reload user settings to the controller to restore
•
Update the controller’s operating system.
SD memory cards are inserted into the slot on the back of the control section of the Calorimetric
Thermometer. Keys are provided on the FILE MANAGEMENT sub-menu to initiate each of the
above actions except updating the controller’s operating system.
