16 Getting Started
If the
Pairing
option is activated, the connection between the AR.Drone 2.0 and any other
Smartphone will not be possible.
To deactivate the
Pairing
option:
1.
Launch
Free Flight.
2.
Tap the Training mode button and press
TAKE OFF
.
3.
Press the
button.
4.
Deactivate the
Pairing
option.
LED colours
The LED lights (light emitting diodes) are the little red or green lights on the device. There are 2
types of LED on the AR.Drone 2.0:
- the 4 motor LEDs located close to the propellers
- the system LED located on the belly of the AR.Drone 2.0.
Motor LEDs
LED behaviour
Meaning
The 4 LEDs are red
Power is connected
A problem has occurred
Each LED flashes red
one after the other
The motors are starting up.
The 4 LEDS flash green
The AR.Drone 2.0 is currently taking off or landing.
The 2 front LEDs are green
The 2 rear LEDs are red
The AR.Drone 2.0 is currently flying. These colours make it
easy for you to distinguish the front and the rear of the
AR.Drone 2.0 (when at a distance from the device).
Summary of Contents for AR Drone 2.0
