background image

C H E C K L I S T

B E F O R E   F L I G H T

 DOWNLOAD FREEFLIGHT PRO AND PIX4DCAPTURE (Available on the App Store only)
1.

  Sign in to the App Store®. 

2.

 Download the free apps FreeFlight Pro and Pix4Dcapture on your smartphone or tablet. 

•  It is recommended to use Pix4Dcapture the free application allowing to generate a flight plan to capture 

photos above a specific area and to make your drone fly autonomously. 

• FreeFlight Pro is the official free application of Parrot allowing to freely pilot the drone. 

CHARGE THE BATTERY OF PARROT DISCO-PRO AG
1.

  The battery must be unplugged from Parrot Disco-Pro AG.

2.

   Select the supplied adapter depending on your country and insert it into the charger.

3.

   Connect the cable to the charger.

4.

   Connect the battery to the charger cable and then plug the charger into the AC outlet. 

The charge time is approximately 55 minutes for an approximate flight time of 25 minutes. 
The light indicator is red during charge and turns green when the battery is charged.

CHARGE THE BATTERY OF PARROT SKYCONTROLLER 2
1.

  Select the supplied adapter depending on your country and insert it into the charger.

2.

  Connect the cable to the charger.

3.

   Connect Parrot Skycontroller 2 to the charger cable and plug the charger into the AC outlet. 

The charge time is approximately 1 hour and 40 minutes for 4 hours of use. 
The light indicator is red during charge and turns green when the battery is charged.

Summary of Contents for DISCO-PRO AG










Reviews: