INSTRUCTION REF: IN100
ISSUE No. 6
DATE 06.06.16
Page 16 of 21
www.parry.co.uk
MANUAL ADJUSTMENT OF TEMPERATURE
This appliance has been factory set to electronically regulate the
temperature of the water. If due to any circumstance where the temperature
of the water is too high or too low it can be adjusted manually. This does
not require the need for a service engineer.
To adjust the temperature
A.
Remove the plastic blanking plug from the lower panel to show
adjustment knob
B.
To increase in temp turn slightly clockwise, to decrease in temp turn
slightly anticlockwise. (It is important to be aware that too high a
temp setting may lead to over boiling and may result in excessive
steam venting from the outlet valve).
C.
Replace the plastic blanking plug.
