INSTRUCTION REF: IN103
ISSUE NO. 6
DATE 19.10.11.
Page 4 of 17
TELEPHONE:
SERVICE (44) 01332 875665
FAX:
SERVICE (44) 01332 875536
Parry Group Limited, Town End Road, Draycott, Derby, England DE72 3PT
www.parry.co.uk
MODEL
PGG6 & PGG7 GAS GRIDDLE
The products stated above are designed and built to comply with the following
standards:
BS EN 203-1
BS EN 203-2-9
The products have been CE-marked in compliance with the
European Gas
Directive (90/396/EEC)
INSTALLATION INSTRUCTIONS
ALL APPLIANCES MUST BE FITTED AND OR CONVERTED BY A
REGISTERED INSTALLER, IN ACCORDANCE WITH CURRENT
REGULATIONS.
INSTALLATION
1.
Appliances are supplied in for use with either Natural Gas or LPG. Natural
Gas appliances have an LPG conversion kit included as standard.
2.
All appliances must not be installed on or against any combustible surface.
3.
Clearances around appliances must be:
1.
CEILING/SHELF
900mm
2.
REAR
75mm
3.
SIDES
NIL
It should be noted that the sides of the appliance will get hot and appliances with
components sensitive to heat, should not be placed directly next to the unit.
4.
During installation provision must be made for combustion air supply to the
appliance, which enters the appliance through the base and rear of the
appliance, this should not be blocked at any time.
SEE TECHNICAL
DETAILS.
5.
Appliances are designed to be installed, and fitted on a Parry stand for
stability. If they are fitted on any other surface they should be suitably
secured.
