INSTRUCTION REF: IN103
ISSUE NO. 6
DATE 19.10.11.
Page 5 of 17
TELEPHONE:
SERVICE (44) 01332 875665
FAX:
SERVICE (44) 01332 875536
Parry Group Limited, Town End Road, Draycott, Derby, England DE72 3PT
www.parry.co.uk
6.
Connection to the appliance is by ½” BSPT at the rear of the appliance.
7.
Pressure test point is located at rear of appliance.
8.
The low rate adjuster is factory set and sealed for natural gas. If a unit needs
to be converted a qualified engineer must reseal the low rate adjuster after
conversion.
9.
Remove all protective film before use.
10.
Ensure whoever is operating the appliance is fully conversant with its
operation and aware of dangers involved in incorrect operation and cleaning,
especially the danger of burns or scalds from the cooking medium and hot
surfaces of working areas.
11.
These appliances are to be installed with sufficient ventilation to prevent the
occurrence of unacceptable concentrates of substances harmful to health in
the room in which they are installed.
