Bernese Mountain Dog G2
Page 14 of 17
Step 3: Connect the antenna to a computer.
A.
Use an ethernet cable to connect a computer to one of the RJ-45 ports on the case that are
connected to the LAN ports on the router.
Step 4: Login to Cradlepoint NetCloud.
A.
Open a web browser on the computer and type 192.168.0.1 into the address bar. This will bring up the
Cradlepoint NetCloud login, shown in Figure 15.
B.
Login to Cradle
point NetCloud. The username is “admin”, and the password is found on the router,
shown in Figure 16.
Figure 15: Access Cradlepoint NetCloud.
Figure 16: Cradlepoint NetCloud Login Password
