background image

GOLDEN RETRIEVER

Installation Instructions

The Golden Retriever is a portable, ruggedized case with a high 

performance 5 in 1 Parsec antenna built into the lid. It is available with 

MIMO LTE, MIMO WiFi, and GPS. This compact, portable office in 

a box is perfect for a wide variety of mobile communications. Add a 

wireless router and battery and this Golden Retriever case antenna will 

provide on the go connectivity wherever you are. Designed to operate 

roughly up to 5 simultaneous devices at once. 

REQUIRED TOOLS

REQUIRED ACCESSORIES (PRO5GR2L2WG-L OR PRO5GR2L2WG-A)

REQUIRED ACCESSORIES (PRO5GR2L2WG-G1 OR PRO5GR2L2WG-G2)

Ethernet Cords: 2pc (Length as required by the customer)(Not required for A version)

Ethernet Cords: 2pc (Length as required by the customer)(Not required for A version)

Ethernet Cords: 2pc (1pc for G1 version. Length as required by the customer)
USB Cords: 1 pc (Length as required by customer. Only for G2 version)
Cradlepoint 2x2 Power to Barrel Adapter (Part #170665-000)

Battery: PowerAdd Pilot Pro 2 23000mAH Portable Battery Charger

Power Supply (required for router)
Extension Cord (NEMA 5-15 Plug to NEMA 5-15 Socket)
Electronic Equipment Power Cord (NEMA 5-15 Plug x IEC C13 Socket, SVT)

Phillips Screwdriver

Router (select one of the following routers.)

Router (select one of the following routers.)

•  CRADLEPOINT IBR900-1200M
•  CRADLEPOINT IBR600
•  INSEEGO SKYUS 160
•  SIERRA WIRELESS AIRLINK RV55

•  CRADLEPOINT IBR900-1200M
•  CRADLEPOINT IBR600
•  INSEEGO SKYUS 160
•  SIERRA WIRELESS AIRLINK RV55

Summary of Contents for GOLDEN RETRIEVER













Reviews: