Antenna Operation:
Step 1.
Step 2.
Step 3.
Open the Beagle antenna enclosure and check the battery level on the LCD screen. Make sure the power switch is OFF. If
the battery level is lower than 25% plug in the battery charger and charge the battery until it is at 100%. Turn OFF the AC
switch when charging to switch OFF the router. (Figure 9 & 10)
Open the fan caps on the left and right side of the antenna enclosure (Figure 11 & 12). Make sure that the antenna is
away from the location subjected to any liquid splashing, especially when the caps are open.
Turn ON the power switch – Wait for two minutes or untll you hear the fan running. (Figure 13)
FIGURE 9
FIGURE 11
FIGURE 12
FIGURE 13
FIGURE 10
