Bernese Mountain Dog
Page 10 of 20
Installation Instructions
Step 4: Connect the router to the RJ-45 ports on the case using ethernet cords (Bernese Mountain
Dog G & L only).
A.
This step only applies to the Bernese Mountain Dog G and L.
B.
Connect the provided ethernet cords to the LAN ports and WAN port on the router, shown in Figures
7 and 8.
C.
Connect the other ends of the ethernet cords from the router to the RJ-45 ports on the case. Keep
track of which cord is connected to the WAN port on the router. Consider connecting the WAN port
on the router to the front RJ-45 port and the LAN ports on the router to the back three RJ-45 ports,
as shown in Figure 9.
Figure 9: Connect the router to the RJ-45 ports on the case using ethernet cords.
WAN
LAN 2
LAN 3
LAN 1