background image

NEWFOUNDLAND

Installation Instructions

The Newfoundland Emergency Hot spot is a large IP67 case with built-

in antennas that are optimized for the extra thick(3.5mm) plastic used 

in industry strength cases. Both sets of LTE and Wi-Fi antennas were 

designed for maximum performance even in remote areas where the 

cellular infrastructure may have been compromised. Parsec has taken 

the unique approach to design all the antennas to fit safely into the lid of 

the case reducing damage and loss of performance due to hard use.   The 

Newfoundland is configurable up to a 13 in 1 with up to 2 sets of 4X4 

MIMO LTE, 4X4 MIMO WIFI and GPS/GNSS capable of running dual 

SIM’s simultaneously. This 5G ready, 600 MHz – 6 GHz antenna is both 

portable and IP67 rated.

REQUIRED TOOLS

REQUIRED ACCESSORIES

5/32 Hex Allen Screwdriver

Router (select one of the following routers.)

Battery: Chargetech 54k AC Battery Pack (OPTIONAL)
Ethernet Cords: 4pc (Length as required by the customer)
USB Cords - 1 pc (length as required by the customer)
Power Supply (required for router)
Battery Straps (OPTIONAL)
Extension Cord (NEMA 5-15 Plug to NEMA 5-15 Socket)

•  CRADLEPOINT AER2200
•  CRADLEPOINT IBR1700-1200M
•  CRADLEPOINT E3000
•  CRADLEPOINT IBR900-1200M (2)
•  SIERRA WIRELESS AIRLINK MG90
•  SIERRA WIRELESS AIRLINK MP70
•  INSEEGO SKYUS 500
•  INSEEGO SKYUS 300

Phillips Screwdriver
9” Zip Ties
Scissors

Summary of Contents for NEWFOUNDLAND










Reviews:

Related manuals for NEWFOUNDLAND