Router Installation:
Step 1.
Step 2.
Step 3.
Take off the top cover plate by unscrewing the 6 cap nuts using the 5/32 Hex Allen screwdriver. (Figure 1)
Check if the router needs brackets to mount it to the router mount plate. The Cradlepoint AER2200 and E3000 will need
brackets to mount. Use the brackets provided in the kit and assemble them onto the router. (Figure 2)
Zip Tie the surge protector to the router mount base plate. (Figure 3) Connect the AC plug of the surge protector to the
AC adapter on the case. (Figure 4)
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
