Step 3.
Step 4.
Step 5.
Step 6.
Step 7.
Plug in one end of the Extension Cord (NEMA 5-15 Plug to NEMA 5-15 Socket) to the case (figure 13) and the other end to
the wall.
Turn on the power source. The router will turn on and display lights will start blinking. If you are using a battery, turn on
the main power switch and the AC switch of the battery.
Connect a network cable between the ethernet ports on a computer and one of the ethernet ports on the antenna
enclosure. Make sure you are connected to a LAN port and not a WAN port.
Bring up a web browser on the computer and type 192.168.0.1 into the address bar. You should see the Cradlepoint login.
(Figure 15)
Type the username and password. Username is “admin” by default. The password can be found on the information
cutout on the router. (Figure 16)
FIGURE 15
FIGURE 16