2. VENTILATION
Petroleum vapor and engine exhaust gases are violent in toxicity. They are harmful to breathe and
deadly if inhaled in large quantities. When test-running an engine indoors, maintain good
ventilation.
3. SELF-PROTECTION
Protect your eyes with suitable safety glasses or safety goggles, when drilling, grinding or
operating air compressor. Protect hands and feet by wearing protective work clothes, safety
gloves and shoes if necessary.
4. LUBRICANTS AND SEALING FLUIDS
When performing maintenance procedures and repair to Parsun outboards, use only products
provided or recommended by our Company.
Under normal conditions of use, there should be no hazards from the use of the lubricants
mentioned in this manual, but safety is all-important, and by adopting good safety practices, any
risk is minimized.
○
1
To protect the skin, the application of a suitable barrier cream to the hands before working is
recommended.
○
2
Clothing which has become contaminated with lubricants should be changed as soon as
practicable, and washed before further use.
○
3
Avoid skin contact with lubricants.
○
4
Hands and any other part of the body which have been in contact with lubricants or
lubricant-contaminated clothing, should be thoroughly washed with hot water and soap as
soon as practicable.
○
5
A supply of clean lint-free cloths should be available for wiping run-off lubricants or grease.
5. GOOD
WORKING
PRACTICES
○
1
Follow the tightening torque instruction. When tightening bolts, nuts and screws, tighten
the large sizes first, and tighten inner-positioned fixings before outer-positioned ones.
○
2
Use the recommended special tools to protect parts from damage. Use the right tool in the
right manner.
DISASSEMBLY AND ASSEMBLY
When disassembly and assembly, please follow the following principles
：
1. Use special tools when disassembling and assembling.
2. Clean dirt before disassembling the parts.
3. Oil the contact surfaces of moving parts before assembly.
4. Install bearing with the manufacturer’s markings on the side exposed to view and liberally oil the
bearing.
3
Summary of Contents for F15/F9.9BM
