Recipe Setup Screen
Lasair II Particle Counter Operations Manual
Page 9-3
•
Class: (Except for Average)
•
Auto-Increment Location (On/Off)
•
Sample Acknowledge (On/Off)
•
Sample Location Type (Names/Numbers)
•
Particle Size (Except BS-5295)
•
Flow: (Uni-directional/multi-directional) (FS-209E only)
•
Room Area (Except Average)
•
Number of Locations to Sample
•
Volume per Sample
•
Number of samples per location
Information not Saved for a Statistics Recipe
•
Statistics User Name
•
Sampling Setup Screen parameters. The number of samples is automatically set
when statistics are enabled, except for average mode. In average mode, the
current sample count is used if possible.
•
Alarm settings. By default alarms are disabled during statistics.
Recipe Setup Screen
The recipe setup screen is located under the Sampling Setup Screen. From the
main display screen, select the
button (1st button). Then select the
button (5th button).
The Recipe Setup Screen has the following two pages:
•
The “Setup” page allows creating, deleting and printing recipes. Sampling
recipes are displayed in cyan, and statistics recipes are shown in purple.
•
The “Locations” page allows recipes to be attached to location names.
